Feasibility of 2-D Multifingered Grasps

Y. Guan and H. Zhang

References

  1. [1] A. Bicchi & V. Kumar, Robotic grasping and contact: Areview, IEEE Int. Conf. on Robotics and Automation, 2000,348–353. doi:10.1109/ROBOT.2000.844081
  2. [2] K. Shimoga, Robot grasp synthesis algorithms: A survey,International Journal of Robotics Research, 15 (3), 1996, 230–266. doi:10.1177/027836499601500302
  3. [3] W. Howard & V. Kumar, On the stability of grasped objects,IEEE Trans. on Robotics and Automation, 12 (6), 1996, 904–917. doi:10.1109/70.544773
  4. [4] D. Montana, Contact stability for two-fingered grasps, IEEETrans. on Robotics and Automation, 8 (4), 1992, 421–430. doi:10.1109/70.149939
  5. [5] J. Trinkle, On the stability and instantaneous velocity ofgrasped frictionless objects, IEEE Trans. on Robotics andAutomation, 8(5), 1992, 560–571. doi:10.1109/70.163781
  6. [6] A. Bicchi, On the closure properties of robotic grasping,International Journal of Robotics Research, 14 (4), 1995, 319–334. doi:10.1177/027836499501400402
  7. [7] Y.-H. Liu, Qualitative test and force optimization of 3-dfrictional form-closure grasps using linear programming, IEEETrans. on Robotics and Automation, 15 (1), 1999, 163–173. doi:10.1109/70.744611
  8. [8] J. Ponce et al., On computing four-finger equilibrium andforce-closure grasps of polyhedral objects, IEEE Trans. onRobotics and Automation, 16 (1), 1997, 11–35.
  9. [9] M. Buss, H. Hashimoto, & J. Moore, Dextrous hand graspingforce optimization, IEEE Trans. on Robotics and Automation,12 (3), 1996, 406–418. doi:10.1109/70.499823
  10. [10] D. Ding et al., Computation of fingertip positions for a form-closure grasp, IEEE Int. Conf. on Robotics and Automation,2001, 2217–2222. doi:10.1109/ROBOT.2001.932952
  11. [11] V.-D. Nguyen, Constructing force-closure grasps, InternationalJournal of Robotics Research, 7 (3), 1988, 3–16. doi:10.1177/027836498800700301
  12. [12] X. Zhu, H. Ding, & J. Wang, Grasp analysis and synthesisbased on a new quantitative measure, IEEE Trans. on Roboticsand Automation, 19 (6), 2003, 942–953. doi:10.1109/TRA.2003.819604
  13. [13] R. Fearing, Implementing a force strategy for object reorien-tation, IEEE Int. Conf. on Robotics and Automation, 1986,96–104.
  14. [14] H. Zhang, K. Tanie, & H. Maekawa, Dextrous manipulationplanning by grasp transformation, IEEE Int. Conf. on Roboticsand Automation, 1996, 3055–3060.279 doi:10.1109/ROBOT.1996.509176
  15. [15] Y.-H. Liu, Computing n-finger form-closure grasps on polygonalobjects, International Journal of Robotics Research, 19 (2),2000, 149–158. doi:10.1177/02783640022066798
  16. [16] L. Han, J. Trinkle, & Z. Li, Grasp analysis as linear matrixinequality problems, IEEE Trans. on Robotics and Automation,16 (6), 2000, 663–674. doi:10.1109/70.897778
  17. [17] Z. Li, T.J. Tarn, & A. Bejczy, Dynamic workspace analysisof multiple cooperating robot arms, IEEE Trans. on Roboticsand Automation, 7(5), 1991, 589–596. doi:10.1109/70.97870
  18. [18] C. Xiong et al., Grasp capability analysis of multifingeredrobot hands, Robotics and Autonomous Systems, 27(0), 1999,211–224. doi:10.1016/S0921-8890(99)00007-X
  19. [19] J. Hong et al., Fine manipulation with multifinger hand, IEEEInt. Conf. on Robotics and Automation, 1990, 1568–1573. doi:10.1109/ROBOT.1990.126232
  20. [20] J. Trinkle, A. Farahat, & P. Stiller, First-order stability cellsof active multi-rigid body systems, IEEE Trans. on Roboticsand Automation, 11 (4), 1995, 545–557. doi:10.1109/70.406939
  21. [21] M. Cutkosky, On grasp choice, grasp models, and the designof hands for manufacturing tasks, IEEE Trans. on Roboticsand Automation, 5 (3), 1989, 269–279. doi:10.1109/70.34763
  22. [22] R. Desai & R. Volz, Identification and verification of termi-nation conditions in fine motion in presence of sensor errorsand geometric uncertainties, IEEE Int. Conf. on Robotics andAutomation, 1989, 800–807. doi:10.1109/ROBOT.1989.100082
  23. [23] J. O’Rourke, Computational geometry in C (Cambridge: Cam-bridge University Press, 1993).
  24. [24] Y. Guan & H. Zhang, Kinematic feasibility of 3-d multifingeredgrasps, IEEE Trans. on Robotics and Automation, 19 (3), 2003,507–513. doi:10.1109/TRA.2003.810235
  25. [25] Y. Guan & H. Zhang, Automatic generation of 2-d canonicalgrasps, 31st Int. Symp. on Robotics, Montreal, May 2000.
  26. [26] J. Pinter, Global optimization in action (Kluwer, 1996).
  27. [27] J. Kerr & B. Roth, Analysis of multifingered hands, Interna-tional Journal of Robotics Research, 4 (4), 1986, 3–17. doi:10.1177/027836498600400401
  28. [28] Y. Guan & H. Zhang, Workspace of 2-d multifingered ma-nipulation, IEEE/RSJ Int. Conf. on Intelligent Robots andSystems, 2003, 3705–3710. doi:10.1109/IROS.2003.1249731
  29. [29] Y. Guan & H. Zhang, Kinematic graspability of a 2-d multi-fingered hand, IEEE Int. Conf. on Robotics and Automation,2000, 3591–3596. doi:10.1109/ROBOT.2000.845291

Important Links:

Go Back