AN INSTANT CENTRE APPROACH FOR ISOTROPY ANALYSIS OF PLANAR PARALLEL MECHANISMS

Soheil Zarkandi

References

  1. [1] T. Yoshikawa, Manipulability of robotic mechanisms, The International Journal of Robotics Research, 4(2), 1985, 3–9.
  2. [2] J. Lloyd and V. Hayward, Kinematics of common industrial robots, Robotics and Autonomous Systems, 4(2), 1988, 169–191.
  3. [3] M.J. Tsai and D.-J. Stone, Inverse velocity analysis for line guidance five-axis robots, Robotics and Computer-Integrated Manufacturing, 25(4–5), 2009, 736–745.
  4. [4] J. Wu, J. Wang, L. Wang, and T. Li, Dynamics and control of a planar 3-DOF parallel manipulator with actuation redundancy, Mechanism and Machine Theory, 44(4), 2009, 835–849.
  5. [5] Y. Lu, S.-Y. Li, and Y. Shi, Determining singularities of some 3-DOF parallel manipulators with linear active legs by 3 × 3 translational/3 × 3 rotational Jacobian matrices, International Journal of Robotics and Automation, 25(4), 2010, DOI: 10.2316/Journal.206.2010.4.206-3351.
  6. [6] S. Zarkandi, A. Vafadar, and M.R. Esmaili, PRRRRRP redundant planar parallel manipulator: Kinematics, workspace and singularity analysis, IEEE Conference on Robotics, Automation and Mechatronics (RAM), 2011, 61–66.
  7. [7] Y. Zhao, Dynamic performance evaluation of a three translational degrees of freedom parallel robot, International Journal of Robotics and Automation, 27(1), 2012, 31–40.
  8. [8] J. Wu, T. Li, J. Wang, and L. Wang, Performance analysis and comparison of planar 3-DOF parallel manipulators with one and two additional branches, Journal of Intelligent and Robotic Systems, 72(1), 2013, 73–82.
  9. [9] Y. Cao, Meiping Wu, and H. Zhou, Position-singularity characterization of a special class of the Stewart parallel mechanisms, International Journal of Robotics and Automation, 28(1), 2013, DOI: 10.2316/Journal.206.2013.1.206-3654.
  10. [10] C.M. Gosselin and J. Angeles, Singularity analysis of closed-loop kinematic chains, IEEE Transactions on Robotics and Automation, 6(3), 1990, 281–290.
  11. [11] A. Fattah and M.H. Ghasemi, Isotropic design of spatial parallel manipulators, The International Journal of Robotics Research, 21(9), 2002, 811–824.
  12. [12] H.R.M. Daniali, P.J. Zsombor-Murray, and J. Angeles, Singularity analysis of planar parallel manipulators, Mechanism and Machine Theory, 30(5), 1995, 665–678.
  13. [13] H.R.M. Daniali, P.J. Zsombor-Murray, and J. Angeles, The isotropic design of two general classes of planar parallel manipulators, Journal of Robotic Systems, 12(12), 1995, 795–805.
  14. [14] H. Li, C.M. Gosselin, and M.J. Richard, Determination of maximal singularity-free zones in the workspace of planar three-degree-of-freedom parallel mechanisms, Mechanism and Machine Theory, 41(10), 2006, 1157–1167.
  15. [15] A.G. Erdman, G.N. Sandor, and S. Kota, Mechanism design, 5th ed. (Upper Saddle River, NJ: Prentice-Hall, Inc., 2001).
  16. [16] R. Di Gregorio, An algorithm for analytically calculating the positions of the secondary instant centers of indeterminate linkages, ASME Journal of Mechanical Design, 130(4), 2008, 1–10.
  17. [17] H.-S. Yan and L.-I. Wu, The stationary configurations of planar six-bar kinematic chains, Mechanism and Machine Theory, 23(4), 1988, 287–293.
  18. [18] H.-S. Yan and L.-I. Wu, On the dead-center positions of planar linkage mechanisms, ASME Journal of Mechanisms, Transmissions, and Automation in Design, 111(1), 1989, 40–46.
  19. [19] R. Di Gregorio, A novel geometric and analytic technique for the singularity analysis of one-dof planar mechanisms, Mechanism and Machine Theory, 42(11), 2007, 1462–1483.
  20. [20] H.R.M. Daniali, Instantaneous center of rotation and singularities of planar parallel manipulators, The International Journal of Mechanical Engineering Education, 33(3), 2005, 251–259.
  21. [21] R. Di Gregorio, A novel method for the singularity analysis of planar mechanisms with more than one degree of freedom, Mechanism and Machine Theory, 44(1), 2008, 83–102.
  22. [22] J. Angeles, Fundamentals of robotic mechanical systems (New York: Springer-Verlag, 1997), 181–188.

Important Links:

Go Back