Kewei Li,∗ Bianhong Li,∗∗ Dongfang Li,∗∗ Chao Wang,∗∗∗ and Hongbin Deng∗∗


  1. [1] J.R. Reinhardt, J.E. James, and E.M. Flanagan, Future employment of UAVs: Issues of jointness, Essay Contest on Military Innovation, 1, 1999, 36–41.
  2. [2] Z. Shahid and A. Rashid, Applications of UAV in daily life, 54th AIAA Aerospace Sciences Meeting, San Diego, CA, 2016.
  3. [3] D. Jiatao, X. Xiaohui, and W. Yang, An adaptive feedforward control method for under-actuated bipedal walking on the compliant ground, International Journal of Robotics and Automation, 32(1), 2017, 63–77.
  4. [4] G. Garcea, A. Madeo, and G. Zagari, Asymptotic post-buckling FEM analysis using corotational formulation, International Journal of Solids & Structures, 46(2), 2009, 377–397.
  5. [5] H. Gao, Y. Zhang, Q. Wu, and J. Song, An analytical model for predicting the machining deformation of a plate blank considers biaxial initial residual stresses, The International Journal of Advanced Manufacturing Technology, 93(1–4), 2017, 1473–1486.
  6. [6] H.-J. Gao, Y.-D. Zhang, Q. Wu, and J. Song, Experimental investigation on the fatigue life of Ti–6Al–4V treated by vibratory stress relief, Metals (Basel), 7(5), 2017, 158:1–13.
  7. [7] K. Choi, M.S. Chun, C.J.V. Tyne, et al., Optimization of open die forging of round shapes using FEM analysis, Journal of Materials Processing Technology, 172(1), 2006, 88–95.
  8. [8] B.H. Xia, Z.S. Chen, T.L. Li, Y.D. Yang, Y. Li, and L. Mei, Construction control of a long span cable-stayed rail transit bridge, International Journal of Robotics and Automation, 32, 2017, 274–282.
  9. [9] H. Hongli, W. Dingwen, G. Puyun, and G. Jian, Finite element analysis of composites wings of UAV, Proc. 20th National Conference on Structural Engineering, Ning Bo, Zhe Jiang, 1, 2011 195–198.
  10. [10] X. Sun and J. Zhang, Effect of the reinforced leading or trailing edge on the aerodynamic performance of a perimeter-reinforced membrane wing, Journal of Fluids and Structures, 68, 2017, 90–112.
  11. [11] J. Nianchao, Z. Guangmin, Z. Xiong, D. Yong, and Z. Zhiqing, The three-dimensional finite element analysis and the experimental study about the main spar of UAV wings, Modern Manufacturing Engineering, (6), 2011, 1–4.
  12. [12] N.I. Ismail, A.H. Zulkifli, M.Z. Abdullah, M. Hisyam Basri, and N. Shah Abdullah, Computational aerodynamic analysis on perimeter reinforced (PR)-compliant wing, Chinese Journal of Aeronautics, 26(5), 2013, 1093–1105.
  13. [13] C. Wei-wei and C. Wan-ji, On the simulation of UAV composite structure and it’s analysis by FEM, Aircraft Design, 32(1), 2012, 15–18.
  14. [14] W. Wei, Z. Zhou, Z. Xiaoping, and W. Rui, Static aeroelastic characteristics analysis of a very flexible solar powered UAV with geometrical nonlinear effect considered, Journal of Northwestern Polytechnical University, 32(4), 2014, 499–504.
  15. [15] Y. Xingyan, F. Zhenyu, and L. Xiang, Finite element analysis of composite wing for unmanned aerial vehicle based on MSC. Nastran, Fiber Reinforced Plastics/Composites, 31(1), 2010, 3–6.
  16. [16] W. Zhiwen, W. Bin, Z. Xing, Z. Ping, and C. Lin, Mechanical simulation analysis of a quad-rotor unmanned aerial vehicle, Electro-Mechanical Engineering, 32(1), 2016, 52–54.
  17. [17] A. Mancini, A. Cesetti, A. Iuale, E. Frontoni, P. Zingaretti, and S. Longhi, A framework for simulation and testing of UAVs in cooperative scenarios, Journal of Intelligent and Robotic Systems, 54(1–3), 2009, 307–329.
  18. [18] M.D. Maughmer, T.S. Swan, and S.M. Willits, Design and testing of a winglet airfoil for low-speed aircraft, Journal of Aircraft, 39(4), 2002, 654–661.
  19. [19] L.F. Gonzalez, J. Periaux, L. Damp, and K. Srinivas, Evolutionary methods for multidisciplinary optimization applied to the design of UAV systems, Engineering Optimization, 39(7), 2007, 773–795.
  20. [20] P. Sandoval, P. Cornejo, and F. Tinapp, Evaluating the longitudinal stability of an UAV using a CFD-6DOF model, Aerospace Science and Technology, 43, 2015, 463–470.
  21. [21] P. Panagiotou, P. Kaparos, and K. Yakinthos, Winglet design and optimization for a MALE UAV using CFD, Aerospace Science and Technology, 39, 2014, 190–205.
  22. [22] J. Verbeke and S. Debruyne, Vibration analysis of a UAV multirotor frame, International Conference on Noise and Vibration Engineering, Leuven, Belgium, 2016.
  23. [23] T. Scott, H. David, T. Giuseppe, and G. Santiago, CFD simulation of a quad-rotor UAV with rotors in motion explicitly modeled using an LBM approach with adaptive, AIAA Science and Technology Forum and Exposition, Grapevine, TX, 2017.
  24. [24] Y. Shenghui, L. Xingxing, C. Bingtai, L. Shixiong, and Z. Yongjun, CFD models and verification of the downwash airflow of an eight-rotor UAV, ASABE 2019 Annual International Meeting, Boston, MA, 2019.
  25. [25] Z.S. Chen, J.T. Zhou, G. Hu, Y. Li, H. Ma, and G.W. Yao, A novel movable scaffolding system (MSS) for a long-span curved girder bridge, International Journal of Robotics and Automation, 32(2), 2017, 164–175.

Important Links:

Go Back